AMI UCLP209-26C Pillow Block Bearings

d2:400 mm; b1:mm; Pu:368.720 kN; s:5 mm; r1s (min):5 mm; d2 (max):mm; Static (Coa):4900 kN; D:600 mm; b:mm; Dynamic (Ca):2255 kN;

Distance H:1.250 in; Basic Dynamic Radial Load Rating:4380 lbf; Dimension N:0.3906 in; Dimension S1:0.8750 in; Weight W:1.10 lb; Shaft Diameter D:1 1/8 in; Dimension C:2.0625 in; Dimension B:5.4375 in; Insert Bearing IB:ZMaRC; Basic Static Radial Load Rating Co:2520 lbf;

Basic Dynamic Radial Load Rating C:88400 N; D:210.0000 mm; Grease Speed Rating Open/Shielded n1:2800 rpm; d:150.000 mm; Accessories:Two Shields; B:28.00 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:3400 rpm; Sealed Speed Rating n3:1800 rpm; Basic Static Radial Load Rating Co:93000

B1:120.396 mm; B4:33.35 mm; d1:188.912 mm; G:199.314 mm; B:30.429 mm; Lock nut:N 040; Sleeve:S 3040x7-7/16; d:200 mm; Threads per inch:8; Mass adapter sleeve assembly:8.85 kg;

Grease:3 500 min-1; D:120 mm; Weight:1.76 kg; d:65 mm; da:72 min; rs (min):1.5 mm; Static (Cor):94.400 kN; a:76 mm; Bearing designation:3213  ; Oil:4 200 min-1;

D:40.0000 mm; Grease Speed Rating Open/Shielded n1:14000 rpm; Basic Static Radial Load Rating Co:6000 N; Accessories:Snap-Ring; d:17.000 mm; Basic Dynamic Radial Load Rating C:8970 N; Fillet Radius ra:0.64 mm; Oil Speed Rating Open/Shielded n2:17000 rpm; B:12.00 mm;

D:200.0000 mm; d:95.000 mm; Oil Speed Rating n2:8800 rpm; Basic Dynamic Radial Load Rating C:325000 N; Grease Speed Rating n1:5900 rpm; B:90.00 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:360000 N; Fillet Radius ra:2.50 mm;

D:190 mm; Grease:790 min-1; static Cor:970.000 kN; d:90 mm; Pu:36.000 kN; rs (min):2.1 mm; H:77 mm; dynamic Cr:384.810 kN; Oil:1 060 min-1; d1:187 mm;

d:355.6 mm; Basic static load rating C0:10000 kN; Basic dynamic load rating C:5100 kN; Mass bearing:170 kg; Fatigue load limit Pu:830 kN; Calculation factor Y2:3; D1 ≈:446 mm; Thrust factor K:1.75; T:317.5 mm; Comparative axial load rating CFa:177 kN;

Mass bearing:0.0031 kg; B:5 mm; d:5 mm; Da max.:12.4 mm; D:14 mm; ra max.:0.2 mm; r1,2 min.:0.2 mm; d2 ≈:6.9 mm; Calculation factor f0:6.6; da min.:6.6 mm;

r, r1,2 min.:0.3 mm; Mass inner ring:0.027 kg; F:30 mm; B:16.5 mm; d:25 mm;

Oil Mist Speed Rating Max. n3:12000 rpm; d:15.880 mm; Oil Speed Rating Max. n2:9000 rpm; Keyway f:1.6 mm; Fillet Radius ra:1.00 mm; Preload:40 lb; Keyway e:16.4 mm; B:25.40 mm; X-L-O Part Number:30-17; D:38.1000 mm;

Coefficient of friction µ max.:0.15; d:220 mm; Specific static load factor K0:45 N/mm²; h:222.5 mm; Coefficient of friction µ min.:0.08; α:124 °; Tolerance housing:H7; D:240 mm; Mass bushing:8.93 kg; B:140 mm;

H1:79.375 mm; B:65.484 mm; J min.:234.95 mm; H:160.338 mm; Basic dynamic load rating C:212 kN; H2:47.625 mm; Limiting speed:3400 r/min; s:32.941 mm; J max.:247.65 mm; Mass bearing unit:10.9 kg;

Sealed Speed Rating n3:750 rpm; Oil Speed Rating Open/Shielded n2:1500 rpm; Basic Static Radial Load Rating Co:390000 N; B:56.00 mm; D:440.0000 mm; Grease Speed Rating Open/Shielded n1:1200 rpm; Fillet Radius ra:3.00 mm; Basic Dynamic Radial Load Rating C:276000 N; d:320.000 mm; Accessories:One Seal