INA WS89307 Thrust Roller Bearing

Brand:NTN; da min:27 mm; t:1.8 mm; d:25 mm; B:20 mm; Lubrication hole on inner ring:Non/No; F:30 mm; ras max:0.3 mm; Mass:0.03 kg; Precision class:P0;

d:70 mm; B:13 mm; da:77 mm; Static Load Rating:30.6 kN; Dynamic Load Rating:21.7 kN; Da:92 mm; Radius:0.6 mm; D:100 mm; Oil Holes:2 mm;

T max.:200 °C; T min.:-20 °C; Recommended tightening torque for set screw:8 Nm; s1:17 mm; Designation of housing:P208N-; C0:19.9 kN; H:49.2 mm; J:137 mm; d:38.1 mm; G:M6x1;

L:60 mm; N:10mm; C:12.8 kN; Z:22.7 mm; J1:40 mm; S:12.7 mm; s1:15.5 mm; Weight:0.47 kg; A1:12 mm; T max.:200 °C;

Designation of bearing:US212-39G2T04; Recommended tightening torque for set screw:16.8 Nm; d:61.91 mm; S:14.9 mm; A:48 mm; e:29 mm; L:175 mm; A2:67.8 mm; C:52.5 kN; C0:32.8 kN;

B1:40 mm; d:50 mm; G:M6x1; B:22 mm; A:40 mm; T max.:100 °C; Weight:2.78 kg; J:138 mm; A4:28 mm; H3:110;

L:310 mm; H2:187 mm; N:25mm; A1:53 mm; B1:82 mm; d1:110 mm; T max.:100 °C; H:95.2 mm; A:83 mm; B:44 mm;

G:M6x1; Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:EX206G2L4; A1:25 mm; H:42.9 mm; s1:34.1 mm; B:36.4 mm; d:30 mm; H1:17 mm; L:85 mm;

da min:86 mm; Mass:3.02 kg; Brand:NTN; Max operating temperature, Tmax:110 °C; D:160 mm; rs min:2.1 mm; Radial clearance class:CN; Characteristic outer ring frequency, BPF0:3.08 Hz; ra max:2 mm; Fatigue limit load, Cu:3.25 kN;

da:181 mm; Da:198 mm; D:220 mm; Dynamic Load Rating:74.5 kN; d:160 mm; Radius:1.5 mm; Oil Holes:2.5 mm; B:25 mm; Static Load Rating:137.7 kN;

Characteristic rolling element frequency, BSF:6.37 Hz; Y2:4.57; Characteristic outer ring frequency, BPF0:7.63 Hz; Characteristic inner ring frequency, BPFI:10.37 Hz; Nlim:1,100 rpm; Brand:SNR; B:44 mm; Y1:3.07; Dynamic load, C:324 kN; da max:97.2 mm;

Z:76.8 mm; N1:25 mm; H1:130 mm; Designation of housing:T211N-; A2:38 mm; N:35mm; L2:19 mm; Dz:110 mm; L:171 mm; H:146 mm;

Ship Weight:1.07 LB; Bearing Series:206 Series; Bearing Duty:Intermediate Duty; Retainer Type:Std Retainer; d:1.1875 in; Retainer Material:Nylon; End Cap Groove:No; Base to Center Height:Not Applicable; Bearing Inner Ring Material:Steel; Bearing Bore Shape:Round;

T min.:-20 °C; Dz:54 mm; A2:21 mm; H1:76 mm; d:15 mm; s1:30.5 mm; Recommended tightening torque for set screw:5.5 Nm; N1:16 mm; G:M6x1; B:34 mm;

Fatigue limit load, Cu:19.8 kN; Harmonized Tariff Code:8482.50.00.00; bore diameter:55 mm; Outside Diameter:4.724 Inch | 120 Mil; Minimum Buy Quantity:N/A; Profile:Complete with Outer; bearing material:Hardened Alloy Steel; Characteristic inner ring frequency, BPFI:7.17 Hz; Max operating temperature